D28117 DeWALT Angle Grinder 115mm 1100w small angle grinder fitted with variable speed control & autobalancer, the electronic variable speed control offers added tool control enables the tool to be used at optimum conditions to suit the accessories fitted and materials cut, the no volt release switch prevents the unit starting when plugged in, even if the switch is in the on position,the switch must be consciously reset before power is delivered
The DeWALT autobalancer reduces the vibration resulting in greater comfort for the operator, overload protection will prevent the unit over heating by shutting the unit off until the unit has cooled down, a torque limiting clutch reduces the maximum torque reaction transmitted to the operator if the cutting disc jams and a dust ejection system removes a majority of debris from the air which passes over the motor, preventing abrasion and tracking preventing machine failure
The motor has fully leaded stator windings for increased motor durability and pop off brushes protect the armature from damage at the end of brush life resulting in greater motor durability, an anti lock flange prevents flanges from permanently locking up and locking the disc on, and the one piece brush arm prevents brush hang up in extreme conditions, complete with side positioned spindle lock giving greater protection to button when using in confined spaces and the anti vibration side handle to improve user comfortNew guard design allows adjustment without the use of tools, increasing the flexibility of the D28117

Specification:
.Power input 1100w
.No load speed 2800-10000rpm
.Maximuim disc diameter 115mm
.Spindle thread M14
.Protective keyless guard
.Multi position anti vibration side handle
.Inner and outer disc flanges
.Spanner
.Size l x h 315mm x 90mm
.Weight 2.0kgs
.12 month full UK industrial warranty