DC223N 24v Cordless SDS 3 Mode Hammer Drill supplied Naked without batteries or charger, with built-in DeWALT Active Vibration Control for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 22mm, the large 19mm optimised hammer mechanism delivers corded drilling performance, fitted with an efficient and compact gearbox for longer runtime and lighter weight, extremely compact design and rear mounted battery for excellent balance and optimum comfort, internal mechanism connected to external housings via spring dampeners meaning significantly lower vibration, reduced user fatigue allowing longer operating periods
Impact-stop mode for rotary drilling only in wood, ceramic, steel, the DC223N is fitted with rotation stop for light chiselling applications in plaster, tiles and render and has an electronic motor brake for additional operator control, the spring loaded battery latch system and guiderail give quick change and and secure battery fitment to the operator, the modular component design allows trouble free servicing with and is fitted with a rubber coated grip to reduce surface vibration and user fatigue
 
Specifications
.Power output 300w
.No batteries supplied with this drill
.No charger unit supplied
.No load speed 1100rpm
.Impact energy 2.1 joules
.Blows per minute 0-4200bpm
.AVC active vibration control
.Tool holder SDS-Plus
.Maximum drilling capacity in wood 30mm
.Maximum drilling capacity in metal 13mm
.Maximum drilling capacity in concrete 22mm
.Multi-position side handle
.Size l x h 290mm x 240mm
.Supplied with a full UK industrial warranty
.Weight 3.8kgs

*Please note we show the DC223N with it's battery in place and is for information only, this machine is supplied NAKED no batteries or charger unit supplied**

***IMPORTANT CUSTOMER INFORMATION REGARDING DeWALT ACTIVE VIBRATION CONTROL (AVC) LEGISLATION***
With recent changes in legislation surrounding vibration control in the workplace, DeWALT have stepped up their efforts in developing the lowest vibration cordless SDS+ Rotary Hammer Drills available
DeWALT have developed a gearbox which is internally mounted on dampening springs which moves independently from the outer casing helping to reduce vibration by over 50%
For example the DeWALT DC224KA 24v Cordless Drill has been given a tri-axial vibration level of only 7.7ms2 allowing this drill to be safely used more than 3 times longer than most other makes on the market
The range of DeWALT SDS+ drills fitted with these mechanisms will consist of  DC212N 2-mode 18v naked machine, DC212KA/DC212KB 2 mode, DC213KA/DC213KB 18v 3-mode with chisel action, DC222KA 24v 2-mode, DC223KA/DC223KB 24v 3-mode with chisel action and the DC224KA/DC224KB 3-mode with chisel action and quick change chuck
The new design with the motor in the vertical position, has allowed DeWALT to make these the shortest machines in their class with a length of only 280mm
The battery is now rear mounted giving superior balance and comfort, the weight of the machines has been reduced with the 24v versions now at 3.7kgs & the 18v machine now only 3kgs