DW625EKQ DeWALT & Trend Router Pack consisting of the DW625EK Router & Trend Worktop Jig KWJ900, the DW625EK DeWalt plunge type router 1/2" collet is fitted with electronic speed control ensuring that the same fine finish is achieved in all grades of timber, aluminium and plastics since the full wave electronic control ensures the selected speed is maintained under any load
The DW625EK is fitted with two column precision guides with large phosphor bronze bushes for plunging accuracy in a high quality aluminium housing so that carefully controlled plunge cuts can be made with the DW625EK
Soft start on the router eliminates that small initial movement that might misalign the cutter, especially important with such a powerful router
This DeWALT router also features dust extraction through the base mounted spout for virtually dust free routing

Specification:
.Power input 2000w
.Electronic variable speed with soft start
.1/4" & 1/2" collets
.Rack & pinion depth adjustor with magnified scale
.30mm guide bush
.Chip guard
.Maximum cutter daimeter 50mm
.Max depth of plunge 80mm
.Parallel guide
.Dust extraction facility
.Heavy duty carrying case
.Size l x h   290mm x 295mm
.Weight 5.1kgs
.12 month full UK industrial warranty

KWJ900 Tradesman Kitchen Worktop Top Jig ALL IN ONE work top jig for up to 900mm worktops hard wearing solid laminate 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up, left hand and right hand corners, 400mm radius penisular joint, 45degree end cut with slight radius, 22.5 degree trade corner solution, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole and 3/4"bsp hole for mixer taps
Fixed lengths for 400mm, 500mm, 550mm, 600mm, 616mm, 650mm, 700mm and 900mm wide worktops, cuts up to 40mm thick worktops with or without anti-drip postformed edge, three open-ended bolt recesses (dog bone style) for 150mm bolts, engraved lines for short 65mm bolts and worktop cross-cut
10mm diameter plastic pins with tapered shoulder for tight fit provides three point pin contact to ensure ease of setting up and engraved markings for identification of pin holes
 
Specification:
.Size 1185mm x 390mm x 12mm  
.Weight 7.7kgs