D25701K DeWALT 7kg SDS-MAX Hammer Drill complete machine for drilling anchor fixing and through holes into concrete and masonry from 18 to 48mm, with core drilling from 40 to 125mm, rotation-stop for demolition applications in brick, masonry and light chasing in concrete fitted with the DEWALT hammer philosophy design: protect mechanism from dust impact, dampen the rebound and develop a low vibration mechanism & Active Vibration Control reducing tri-axial vibration by up to 30% according to the Physical Agents Directive 2002/44/EC  HAV
The Complete Torque Control allows the unique patented 2-steps clutch allowed the user to work with a higher protection level, 1st step: small bit (up to 40mm), 2nd step: higher bit (40 to 48m) and core bits, electronic speed and impact energy control, floating rear handle and lock on switch for chipping, brush wear and service indicators allow for minimum operator down time

Specifications
.Power input 1300w
.Power output 840w
.Load Speed: 137-275 rpm
.Blows per minute 1260-2520bpm
.Impact energy 2-14jls
.Tool holder SDS-Max
.Maximum drilling capacity [Concrete] 48mm
.Maximum drilling capacity [Breakthrough bit] 80mm
.Maximum drilling capacity [Core bit] 125mm
.Multi-position side handle
.Grease & cloth
.Carrying case
.Size l x h 528mm x 268mm
.Weight 8.3kgs
.Full 1 year industrial UK warranty