COMBI66 Trend worktop jig designed to enable all 1/2" shank plunge routers to cut precise butt & scribe joints in postform workstops machined from hardwearing solid laminate and will produce a joint in 15 minutes includes setting-up time with out-of-square joints that can be accommodated
Facilities to cut various widths of board and thicknesses up to 42mm with integral panel bolt connector recessing template with easy spanner access and width setting stop for accurate positioning, the jig is supplied with clear & comprehensive instructions for use
The jig is supplied as a single male and female template in 16mm solid laminate with the facility to join boards from 500mm to 650mm wide and two bolt recess slot for connecting bolts, three alloy location bushes & width setting stop, the jig cuts out of square joints to a maximum of 3 degree and is supplied with 3 location bushes & 1 length stop
 
The jig requires:
.A portable plunge router with 12.7mm (1/2") shank capacity and minimum 1300 watts
.A template guide bush with 30mm outside diameter
.A TCT router cutter with 12.7mm (1/2inch) diameter and 50mm (2inch) cut length
.Two 100mm (4inch) throat clamps